The fiber wall outlet that brings the optical connection to any room, up to 40 meters, without splices or invasive installation. Integrated rotating reel, 32 installation configurations.
Optilink is a fiber optic wall outlet with a 10, 20, 30 or 40-meter SC/LC-APC patch cord connected to an adapter and wound onto an internal rotating reel. The cable remains stored inside the outlet or can be unwound when needed.
It is designed to extend an FTTH connection to any room in the house from a single entry point, avoiding additional trunking whenever the fiber endpoint changes.
Optilink Reel Wall Outlet – Key Features
Designed for professionals who actually install fiber, with clean integration and precise handling on site.
Two outputs per side, compatible with Silway® 4/5 mm. The most widely used skirting‑duct system attaches directly, with no dedicated adapters required.
Transparent PA12 patch cord with 900 µm jacket. ITU‑T G.657 A2 fiber, tolerant to tight bending radii typical of indoor installations.
SC‑APC or LC‑APC adapter, rotatable on four sides. A single housing supports both connector standards; the adapter rotates to any face of the outlet.
Choose a lockable reel or free rotation. Lock the already‑unwound cable length, or leave it free to retrieve additional fiber at any time.
Supplied with 2 screws and 2 wall plugs. The reel detaches from the base to simplify cabling during installation.
Body in ABS UL94‑V0, self‑extinguishing material. Traffic‑white RAL 9016 finish for discreet, clean wall integration.
TWO DIFFERENT OUTPUTS FOR THE PATCH CORD:
LEFT OUTPUT
RIGHT OUTPUT
POSSIBILITY TO LOCK/UNLOCK REEL ROTATION:
LOCKED ROTATION
FREE ROTATION
