ODF frame is a 900x300x2.200 mm rack equipped with 19” 47RU uprights where the distance between the pair of rear uprights and the rear panel is 20mm and the distance between the two pairs of uprights is 220mm.
The uprights have 9.5mm square holes. The frame has an optional double-door with 180° opening, door closure with magnets. Standard color is RAL 7035.

Features:

• Fiber curvature radius protected throughout the frame;
• Complete accessibility thanks to the front doors (optional) that can be opened at 180°;
• N.4 300×150 holes for fiber passage on both side walls, closeable with special panels;
• N.8 300×100 holes for fiber passage on the back wall, closeable with special panels;
• N.3 horizontal panels for 3RU fiber dispersion supplied;
• Rear panel completely prepared for accompanying tubes in drawers for each of the 47RU;
• Right side of the frame with ring elements for accompanying fibers;
• standard Ral 7035 color;
• Provision for back to back fixing;
• Provision for wall and floor fixing;
• N.3 left side brackets for mounting up to 12 fiber optical dividers;
• Optional 192 FO optical dividers;
• Optional F.O. protection tube;
• Fiber management rings on right front upright available for all 47RU.

Compliances & Conformities

• EN 61587 -1:2012 Mechanical Structures for Electronic Equipment;
• IEC 297-2 Overall cabinet dimensions;
• CE conform to EN 60950-1:2006 Information Technology Equipment – ​​Safety Part-1-General Requirement;
• UL listed to: UL 2416, Outline of Investigation for Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure and Rack Systems;
• UL 60950-1 and CSA C22.2 NO.;
• 60950-1-07, Information Technology Equipment Safety Part 1: General requirements;
• ISO9227-ASTM B117-85 Epoxy Polyester Powder Coated 80-120micron-500+ hours Salt Spray resistance to corrosion Operating Temperature -25 °C – +70 °C;
• – based on IEC 60068-2-1 cold test- IEC 60068-2-2 – dry heat.
• based on IEC 60068-2-1 cold test- IEC 60068-2-2 – dry heat.